0.0400 in. Cutter Diameter x 0.1200 in. Length of Cut 4 Flute Carbide Ball Micro Endmill
- Item Code: TC59040
- (912)
- Availability:
- Mfg Part #: TC59040
- Brand: Titan USA
Unit Size: 1
Features Back To Top
- Offered in stub and regular flute styles
- 4 flutes
- Center cutting
- AlTiN coating offers increased wear and heat resistance
- Solid carbide
- CNC ground in the USA
Tech Specs Back To Top
Brand | Titan USA |
---|---|
Coating/Finish | None |
Decimal Diameter | 0.0400" |
Length of Cut | 0.1200" |
Material | Solid Carbide |
Number of Flutes | 4 |
Shank Diameter | 0.1250" (1/8) |
Customer Reviews
Back To Top912 Customer Reviews
4.5 out of 5 stars overall
of customers recommend
this thing is awesome
Jon Smith
so i am converting the walk up attic in my Cape Cod style house into a 2nd floor. Bought this to do the framing with. its awesome, hands down. ive used a few other brands but there is a few things i liked about it: 1- changeable directed exhaust feature. no more blow back in the face 2- nail depth of drive is easy to change on the fly. 3- ive run about 1200 nails through it. 1 jam and that was a defect in the nail clips spacing. not once did it try to shoot more than 1 nail per trigger pull.
Outstanding quality
Michelle Gibson
The Porter Cable Framing Nail Gun was a good value and is an excellent product. First, the no-mar nylon foot slides right off to reveal barbs that help to hold the gun in place when toe-nailing framing projects. Second, a few drops of included oil in the air inlet is all it takes to complete preventive maintenance on the tool. The case keeps all the components together in one place. At just over 100 3" nails so far and not one jam or mis-fire. I have other Porter Cable nail guns that I have been so impressed with and plenty of framing to do on my remodel. I might even build my own shop with this gun to make the most of it!
Powerful.
Terry Alistair
Have used this nailer to put together a 24 X 52 ' garage. Absolutely great, takes changes in nails without issue, operated between 80 and 120 PSI, had very few nails to knock down even in the treated beams. If this one ever dies I will buy another, this thing is great. Doing siding, depth of drive was easy to make when needed and the results were consistent.
Even though I have two framing nailers, I could not pass up the deal on this one.
Richard Dean
Great quality nailer at a fantastic price. Just remember to turn the exhaust port on the top of the nailer so it doesn't hit you in the face when leaning over the nailer. I'm very happy with it . It appears to be as good of quality as my more expensive Hitachi and better than my Cambell Hausfeld. It uses the plastic sleeved nails and sometimes leaves plastic pieces under the nail head. This can be a problem if the nails are exposed like the top of a deck but otherwise perfect so far. Most of the plastic pieces are easily brushed away. Every now and then I would have to pull a plastic piece out from under the nail head. This is nit picking and not a problem for framing.
This is the second one of these I've purchased. I bought the first one several years ago and have...
Jane Williams
This is the second one of these I've purchased. I bought the first one several years ago and have used it to build everything from houses to sheds or just putting up a new wall. I just bought the second one as a Christmas gift for my father-in-law. It is the lightest of all the framing guns at around 7 lbs making it easy to handle when nailing while your arm is extended. It also comes with a belt hook, so you can hang it while working on a ladder. I own two other framing guns and this is the one I always pick up first on a job and usually loan out the other two. It has it's limitations. Its not as fast as some of the more expensive guns. It doesn't do rapid touch-and-go style very well, but I like taking my time.
Great for detail projects
Becky Sing
We bought this compressor to install trim around our porch roof and to install a chair rail in one of our bedrooms. The tools provided in this combo were perfect for both jobs. I loved the option of 2 couplers so we could both be using the compressor at the same time! Much easier than lugging the compressor around when moving around the room. A great purchase for detail projects! We can't wait to use it again.
Solid nail gun
Frank Smith
I bought this for my company use and it's very solid. The only problem I have is the higher price for the nails the gun uses. The upfront savings will definitely be lost due to the cost of the plastic-collated nail strips.
Good Product
Peron Markinson
Used for long hours without problem. Not as noisy as expected as per reviews. Good for the price.
Just what I wanted in a nail gun!
Parker Bragg
Very happy with the performance and nice llittle details of this roofing gun. Makes my job go so much faster!
It is an excellent working tool, buy this combo to make a wooden ceiling and was fantastic, super...
Mike Julio
It is an excellent working tool, buy this combo to make a wooden ceiling and was fantastic, super fast without using hammers or nail pain, and my wife can help me easily :). It has 2 pistols and a stapler, I use the 3 and I speed up the work. In addition the compressor has an extra amount of tools to adapt. I already buy it an inflator kit and a paint kit.
Related Items Back To Top
1/4 (.2500) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub
32873
3/16 Inch Diameter, 3/8 Inch LOC, 2 Inch OAL Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix Ball Nose End Mill
17918700A
1mm Diameter Solid Carbide Altima 52 Coated Center Cutting TuffCut DM® 2-Flute Ball Nose End Mill
15603940A
1/8 x 2-1/2 x 1/8 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating
SCBS 125-250-125-CTX
1/2 x 4 x 1/4 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating
SCBS 500-400-500-CTX
1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM14B4
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM12B4
3/8 in. Diameter x 7/8 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM38B4
1/8 Inch Solid Carbide, AlTiN Coated, 4-Flute, 1/2 LOC, 1-1/2 Inch OAL, Single End Ball Nose Endmill
54070-COATED
1/8 in. Diameter x 1/2 in. Length of Cut x 1-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM18B4
1/4 x 3 x 1/4 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating
SCBS 250-300-250-CTX-2
0.1870 in. Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill
897712-C3
17/64 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose TiAlN Coated Endmill
CEM1764B4TIALN
1/4 in. Diameter x 1-1/2 in. Length of Cut x 4 in. Overall Length Carbide 2 Flutes Ball Nose TiCN Coated Endmill
CEM14BXL2TICN
3/15 in. Diameter x 5/16 in. Length of Cut x 2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM316BS4