15/64 Inch, 135 Degree Drill Point Angle, TiAICr/TiSi Coated, Solid Carbide Taper Length Drill Bit
Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum chromium (TiAlCr) and titanium silicon (TiSi) is a super multi-layered coating. The TiAlCr/TiSi coating is used for general purpose applications without coolant thru
Features Back To Top
- Long Tool Life
- New cutting edge design and special DEX coating provide long tool life in a wide variety of work materials.
- Stable Chip Evacuation
- New flute design and wide chip pocket allows for excellent chip management and evacuation.
- Quiet Cutting & Stable Cutting
- Stable drilling with minimal vibration even in small machine applications
- Environmentally Friendly
- Compatible with MQL (Minimum Quantity Lubrication) Systems.
Tech Specs Back To Top
| Brand | Sumitomo |
|---|---|
| Coating/Finish | DEX |
| Coolant Supply | Internal |
| Decimal Size | 0.2344" |
| Depth Diameter Ratio | 8xD |
| End Type | Single |
| Fractional Size | 15/64" |
| Length of Cut | 2.5984 Inch |
| Material | Solid Carbide |
| Metric Size | 5.95 mm |
| Overall Length Decimal | 4.6457" |
| Point Angle | 135 Degree |
| Product Name | Long Drill |
| Series | MDW-HGS8 |
| Shank Diameter | 0.2344 Inch |
| Shank Length | 2.0472 Inch |
Customer Reviews
Back To TopRelated Items Back To Top
13/16 in. (.8125) HSS Bright Finish 118? Standard Point Series R51 Taper Length Drill
051052
1.6mm Diameter Taper Length Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 130° Point, Right Hand Cut, 10/pack
535-1.60
13/32 Inch Diameter, Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut
668-10.32
3/16 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut
336-4.76
7/32 Inch, 135 Degree Drill Point Angle, TiAICr/TiSi Coated, Solid Carbide Taper Length Drill Bit
MDW02188HGS8
1/8 in. (.1250) HSS Bright Finish 118 Deg. Standard Point Series R51 Taper Length Drill
051008
1/4 Inch, 135 Degree Drill Point Angle, TiAICr/TiSi Coated, Solid Carbide Taper Length Drill Bit
MDW02500HGS8
0.85mm Diameter Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack
667-0.85
5/32 Inch, 135 Degree Point Angle, TiAICr/TiSi Coated, Solid Carbide Taper Length Drill Bit
MDW01562HGS8
2.5mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut, 10/pack
336-2.50
6.8mm, 135 Degree Drill Point Angle, TiAICr/TiSi Coated, Solid Carbide Taper Length Drill Bit
MDW0680HGS8
11.2mm Diameter Taper Length Drill, 2 flutes, HSS, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut
217-11.200
41/64 Inch Diameter, Taper Length Drill, 2 flutes, HSS, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut
217-16.270
0.8mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Right Hand Cut, 10/pack
317-0.800
1/4 Inch Diameter, Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut
667-6.350
