Tech Specs Back To Top
| Brand | Gorilla Mill |
|---|---|
| Coating/Finish | ZrN |
| End/Corner Shape | Square |
| Fractional Diameter | 1/2" |
| Length Of Cut | 1" |
| Machining Methods | Profiling, Full Slotting, Pocketing, High-Velocity |
| Material | Solid Carbide |
| Number of Flutes | 3 |
| Overall Length | 3" |
| Performance | High Performance |
| Series | Silverback |
| Shank Diameter | 1/2" |
| Tolerances | Cut Dia +.000/-.002, Shank Dia -.0001/-.0005, LOC +.025/+.050, OAL +/-.050 |
| Tool Length | Standard |
| Unit of Measure | Inches |
Customer Reviews
Back To TopRelated Items Back To Top
3/8 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length Carbide 3 Flutes Square Endmill
GMA38FXL3
1/16 (.0625) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub
32824
3/8 (.3750) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub
32833
3/8 Inch Diameter, 1/2 Inch LOC, 2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill
17837500A
1/2 (.5000) 5-Flutes, 45° Helix, Square TIALN Coated Solid Dura-Carb 3845 Falcon Finisher End Mill
38166-FULLERTON
5/8 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length Carbide 3 Flutes Square ZrN Coated Endmill
GMACB58FL3ZRN
3/8 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length Carbide 5 Flutes Square GMX-35 Coated Endmill
GM38FXL5
1 in. Diameter x 3 in. Length of Cut x 6 in. Overall Length Carbide 4 Flutes Square GMX-35 Coated Endmill
GM10FXL4
1/4 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length Carbide 4 Flutes Square GMS2 Coated Endmill
GMRF14FL4
1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 2 Flutes Square Endmill
CEM14F2
1 in. Diameter x 2-1/4 in. Length of Cut x 5 in. Overall Length Carbide 4 Flutes Square GMX-35 Coated Endmill
GM10FLH4WF
3 mm Diameter x 12 mm Length of Cut x 38 mm Overall Length Carbide 3 Flutes Square ZrN Coated Endmill
GMA0300MMF3ZRN