Tech Specs Back To Top
| Adapt/Shank/Bore Diameter WKPS (In) | 0.6250 |
|---|---|
| Adapt/Shank/Bore Diameter WKPS (mm) | 15.875 |
| Adapt/Shank/Bore Diameter WKPS F | 5/8 |
| Adapter Size Machine Side-EPP | 0500 |
| Adapter Size Workpiece Side | 0625 |
| Adapter Style Machine Side | CV-Caterpillar V-Flange In |
| Adapter Style Machine Side-EPP | SKG31ANSICAT InThdStyADw/CntC |
| Adapter Type Machine Side | Taper Shank |
| Adapter Type Machine Side-EPP | SKG - Steep Taper |
| Adapter/Shank/Bore Diameter (Fractional) | 2 3/4 |
| Adapter/Shank/Bore Diameter (Inch) | 2.7500 |
| Adapter/Shank/Bore Diameter (mm) | 69.850 |
| Body Diameter 1 Workpce Side (In) | 1.6250 |
| Body Diameter 1 Workpce Side (mm) | 41.275 |
| Body Diameter Machine Side (In) | 3.8750 |
| Body Diameter Machine Side (mm) | 98.425 |
| Brand | WIDIA-Erickson |
| Clamp Screw ID Drive Size | 1/4 |
| Clamp Screw Thread Size | 9/16-12 |
| Flange Length (Metric) | 15.875 |
| Flange-Front End Dist (In) | 5.0000 |
| Flange-Front End Dist (mm) | 127.000 |
| Gage Length 1 (Inch) | 5.7500 |
| Gage Length 1 (Metric) | 146.050 |
| Max Interference Diameter (Inch) | 2.7500 |
| Overall Length (Inch) | 9.7500 |
| Overall Length (Metric) | 247.650 |
| Shank Length (Inch) | 4.1250 |
| Shank Length (Metric) | 104.775 |
| System Size Machine Side | CV50 |
| Units of Tool (Extract) | IN - Inch |
| Usable Length (Inch) | 4.1063 |
| Usable Length (Metric) | 104.300 |
Customer Reviews
Back To TopRelated Items Back To Top
CAT40 x 3/4 Inch Inside Diameter x 1-3/4 Inch Length Stubby Length End Mill Holder
22921-1.75
CAT40 x 1/4 Inch Inside Diameter x 2-1/2 Inch Length CoolBLAST End Mill Holder
22911-2.5B
CAT40 x 3/8 Inch Inside Diameter x 2-1/2 Inch Length CoolBLAST End Mill Holder
22915-2.5B
CAT40 x 1/2 Inch Inside Diameter x 2-1/2 Inch Length CoolBLAST End Mill Holder
22917-2.5B
CAT40 x 1 Inch Inside Diameter x 1-3/4 Inch Length Stubby Length End Mill Holder
22925A-1.75
CAT40 x 1/4 Inch Inside Diameter x 4 Inch Length CoolBlast End Mill Holder with CoolFLEX
22911-4FB
3/4 Inch Hole Diameter, 1-8 Drawbar Thread, 7-3/4 Inch, CAT50 Taper Shank End Mill Holder
CV50EM075775
