1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius
NEW from Guhring - carbide end mills for ramping, roughing, slotting and drilling.
The variable helix end mill consists of unequal flute spacing at various points along the cutting length of the tool. Unequal flute spacing helps dampen vibration that is generated by the milling process. This vibration dampening permits faster feed rates and improved surface finishes when properly applied. Guhring offers a variety of variable helix designs depending on the application. Roughing end mills, finishing end mills, coolant fed as well as material specific designs are available as standard stocked items in both fractional and metric sizes.
Features Back To Top
- Optimal chip space
- Cutting Edge Preparation
- nano-Si coating
- Face Geometry for drilling and ramping
Tech Specs Back To Top
Brand | Guhring |
---|---|
Coating | Nano-Si |
Coolant | without |
Decimal Cutting Diameter | 0.2500" |
Fractional Cutting Diameter | 1/4" |
Helix Angle | 36/38/37/38° |
Length of Cut | 1/2 |
Material | Solid Carbide |
Metric Cutting Diameter | 6.35 mm |
Number of Flutes | 4 |
Overall Length | 2-1/2 |
Overall Length (decimal) | 2.5000 |
Overall Length (mm) | 63.5 |
Radius Decimal | 0.0310" |
Series | 6759 |
Shank Dia (decimal) | 0.2500 |
Shank Diameter | 1/4 |
Shank Diameter (mm) | 6.35 |
Shank Type | HA/HB |
Customer Reviews
Back To TopRelated Items Back To Top
3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill
GM316R5030
5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill
GMHTCB58RHL5030
3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill
GMHTCB38RH7030
1/2 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM12RH4015
3/4 in. Diameter x 2-1/4 in. Length of Cut x 5 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill
GMHTCB34RLH5030
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill
GMHTCB12R5030
1/8 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill
GM18RL5015
5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes ZrN Coated Endmill
GMACB58RHL3015ZRN
5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes Endmill
GMACB58RHL3015
3/4 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.25 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM34RL4250
1/8 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM18RL4015
1/4 in. Diameter x 1/2 in. Length of Cut x 2 in. Overall Length x 0.06 in. Radius Carbide 4 Flutes GMS2 Coated Endmill
GMRF14RS4060
1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMS2 Coated Endmill
GMRF12RXL4015
1/4 in. Diameter x 3/8 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes Endmill
GMANR14R30151.125
10 mm Diameter x 16 mm Length of Cut x 50 mm Overall Length x 0.50 mm Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM1000MMRS4050
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill
GMHTCB12R7030
3 mm Diameter x 12 mm Length of Cut x 38 mm Overall Length x 0.20 mm Radius Carbide 3 Flutes ZrN Coated Endmill
GMA0300MMR3020ZRN
1/4 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill
GMHT14RL7030