1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/37/38° Helix Angle, 0.0039 chamfer
NEW from Guhring - carbide end mills for ramping, roughing, slotting and drilling.
The variable helix end mill consists of unequal flute spacing at various points along the cutting length of the tool. Unequal flute spacing helps dampen vibration that is generated by the milling process. This vibration dampening permits faster feed rates and improved surface finishes when properly applied. Guhring offers a variety of variable helix designs depending on the application. Roughing end mills, finishing end mills, coolant fed as well as material specific designs are available as standard stocked items in both fractional and metric sizes.
Features Back To Top
- Optimal chip space
- Cutting Edge Preparation
- nano-Si coating
- Face Geometry for drilling and ramping
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0039" |
Chamfer Metric | 0.10 mm |
Coating | Nano-Si |
Coolant | without |
Decimal Inch (dia) | 0.1250 |
Fractional Diameter | 1/8" |
Helix Angle | 36/37/38° |
Length of Cut | 1/4 |
Material | Solid Carbide |
Metric Diameter | 3.17 mm |
Number of Flutes | 4 |
Overall Length | 1-1/2 |
Overall Length (decimal) | 1.5000 |
Overall Length (mm) | 38.1 |
Series | 6757 |
Shank Dia | 1/8 |
Shank Dia (decimal) | 0.1250 |
Shank Diameter (mm) | 3.17 |
Shank Type | HA/HB |
Customer Reviews
Back To TopRelated Items Back To Top
3/4 in. x 3/4 in. x 1-1/2 x 4 in. Solid Carbide TiALN-LW 4 Flute Weldon Shank Square End .020 Corner Chamfer Width End Mill
TF4V0519007
1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer
3093-6.35
3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.0177 chamfer
3100-19.05
1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.016 chamfer
3053-12.70
1/2 Inch Diameter Endmill, 5 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer
4264-12.70
1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer
6757-6.35
3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0118 chamfer
6757-9.520
1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/37/38° Helix Angle, 0.0161 chamfer
6757-12.70
3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/37/38° Helix Angle, 0.0059 chamfer
6757-4.76
5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer
6757-7.94
3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.006 chamfer
3053-4.76
3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer
3179-9.52
3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/37/38° Helix Angle, 0.024 chamfer
6757-19.05
12mm Diameter Endmill, 12mm shank, 3 flutes, 26mm Length of Cut, 46 Reach (mm), Carbide, Bright Finish, HA Shank, 93mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)
3473-12.00
3/8 in.x 3/8 in. x 1/2 in. x 2 in. Solid Carbide WP15PE 4 Flute Cylindrical Shank Square End .020 Corner Chamfer Width End Mill
4V4510004NT WP15PE
1 in. x 1 in. x 3 in. x 5-1/2 in. HSS-E/PM TiAIN 5 Flute Weldon Shank .059 Corner Chamfer Width End Mill
TF6T3R25008
1 in. x 1 in. x 3 in. x 5-1/2 in. HSS-E/PM TiCN 3 Flute Weldon Shank .020 Corner Chamfer Width End Mill
TC6A3R25008