1 Inch Diameter Endmill, 1 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HB Shank, 5 Overall Length, 30/32° Helix Angle, 0.0315 chamfer
Features Back To Top
- Low cutting pressure and power consumption
- Vibration-free operation
- Increased feed rates possible
- Increased surface qualities (R = 2-3 µm)
- Longer tool life
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0315 |
| Chamfer Metric | 0.8 |
| Coating/Finish | FIREX |
| Decimal Diameter | 1.0000" |
| Helix Angle | 30/32° |
| Length of Cut | 2-1/4 |
| Material | Solid Carbide |
| Metric Diameter | 25.40 mm |
| Number of Flutes | 4 |
| Overall Length | 5 |
| Overall Length (decimal) | 5 |
| Overall Length (mm) | 127 |
| Series | 4256 |
| Shank Dia (decimal) | 1.0000 |
| Shank Diameter | 1 |
| Shank Diameter (mm) | 25.4 |
| Shank Type | HB |
Customer Reviews
Back To TopRelated Items Back To Top
0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill
TC29524
0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill
TC29516
0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill
TC29532
0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill
TC29540
1/4 in. x 1/4 in. x 1/2 in. x 2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill
I4S0250T050S TIALN
1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill
I4S0125T050R TIALN
0.5000 in. (1/2) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill
TC29332
0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill
82700-HELICAL
12.00 mm Cutter Diameter x 12.00 mm Shank Diameter x 0.960 mm Radius x 12.00 mm Length of Cut x 125.00 mm Overall Length x 72.00 mm Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill
82716
1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide Stub 4 Flutes GMS2 Coated Rougher/Finisher Endmill
GMHX12RS4015
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.06 in. Radius Carbide 4 Flutes GMS2 Coated Rougher/Finisher Endmill
GMHX12R4060
0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 7.0000 in. (7) Overall Length x 4.0000 in. (4) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill
83737
3.00 mm Cutter Diameter x 3.00 mm Shank Diameter x 0.24 mm Radius x 3.00 mm Length of Cut x 50.00 mm Overall Length x 18.00 mm Reach Carbide 4 Flute Tplus Coated High Feed Endmill
82680
4.00 mm Cutter Diameter x 4.00 mm Shank Diameter x 0.320 mm Radius x 4.00 mm Length of Cut x 63.00 mm Overall Length x 16.00 mm Reach Carbide 4 Flute Tplus Coated High Feed Endmill
82682
0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length x 1.1250 in. (1-1/8) Reach Carbide 4 Flute Tplus Coated High Feed Endmill
83730
0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Combination Feed & HEM Endmill
84492
1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in. Solid Carbide Uncoated 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill
I4S0125T050R UNCOATED