10mm Diameter Endmill, 10mm shank, 2 flutes, 20mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 72mm Overal Length, 30° Helix Angle
Features Back To Top
- Accurate tolerances on diameter
- Close radius tolerances
- Radius grind with constant helix correction
- Straight and radius areas ground in one pass
- Grinding process for highest surface finish finishes
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Coating/Finish | Nano |
| Decimal Diameter | 0.3937" |
| Helix Angle | 30° |
| Length of Cut (Decimal) | 0.7870 |
| Length of Cut (mm) | 20 |
| Material | Solid Carbide |
| Metric Diameter | 10.00 mm |
| Number of Flutes | 2 |
| Overall Length (Decimal) | 2.8346 |
| Overall Length (mm) | 72 |
| Series | 3854 |
| Shank Diameter (Decimal) | 0.3937 |
| Shank Diameter (mm) | 10 |
| Shank Type | HA |
Customer Reviews
Back To TopRelated Items Back To Top
1/4 (.2500) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub
32873
3/16 Inch Diameter, 3/8 Inch LOC, 2 Inch OAL Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix Ball Nose End Mill
17918700A
1mm Diameter Solid Carbide Altima 52 Coated Center Cutting TuffCut DM® 2-Flute Ball Nose End Mill
15603940A
1/8 x 2-1/2 x 1/8 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating
SCBS 125-250-125-CTX
1/2 x 4 x 1/4 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating
SCBS 500-400-500-CTX
1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM14B4
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM12B4
3/8 in. Diameter x 7/8 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM38B4
1/8 Inch Solid Carbide, AlTiN Coated, 4-Flute, 1/2 LOC, 1-1/2 Inch OAL, Single End Ball Nose Endmill
54070-COATED
1/8 in. Diameter x 1/2 in. Length of Cut x 1-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM18B4
1/4 x 3 x 1/4 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating
SCBS 250-300-250-CTX-2
0.1870 in. Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill
897712-C3
17/64 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose TiAlN Coated Endmill
CEM1764B4TIALN
1/4 in. Diameter x 1-1/2 in. Length of Cut x 4 in. Overall Length Carbide 2 Flutes Ball Nose TiCN Coated Endmill
CEM14BXL2TICN
3/15 in. Diameter x 5/16 in. Length of Cut x 2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill
GM316BS4