10mm Diameter Endmill, 10mm shank, 3 flutes, 19mm Length of Cut, 30 Reach (mm), with Coolant, HA Shank, 72mm Overal Length, 45° Helix Angle, 1.5 radius (mm)
Slot and pocket milling often creates chip evacuation problems, especially on vertical machining centers. Re-cutting chips can cause end mill failure.
Coolant-through end millshelp evacuate chips from the cutting zone. This eliminates the problem or re-cutting chips.
Alumi-tech carbide end mills are designed specifically for milling aluminum and aluminum alloys. Suitable for slot and roughing applications, these tools are available in two and three flute designs, solid and coolant fed. Bright finished and Super-A™ coated standard product is available from stock.
Features Back To Top
- Radial coolant exit (64° angle) for optimal chip evacuation
- Radius geometry with continuous helix-radius-correction
- Reduced neck ground for collision reduction
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Coolant | with |
| Decimal Cutting Diameter | 0.3937" |
| Helix Angle | 45° |
| Length of Cut (decimal) | 0.748 |
| Length of Cut (mm) | 19 |
| Metric Cutting Diameter | 10.00 mm |
| Number of Flutes | 3 |
| Overall Length (decimal) | 2.8346 |
| Overall Length (mm) | 72 |
| Radius Decimal | 0.0591" |
| Radius Metric | 1.50 mm |
| Reach (decimal) | 1.1810 |
| Reach (mm) | 30 |
| Series | 3367 |
| Shank Dia (decimal) | 0.3937 |
| Shank Diameter (mm) | 10 |
| Shank Type | HA |
Customer Reviews
Back To TopRelated Items Back To Top
3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill
GM316R5030
5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill
GMHTCB58RHL5030
3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill
GMHTCB38RH7030
1/2 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM12RH4015
3/4 in. Diameter x 2-1/4 in. Length of Cut x 5 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill
GMHTCB34RLH5030
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill
GMHTCB12R5030
1/8 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill
GM18RL5015
5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes ZrN Coated Endmill
GMACB58RHL3015ZRN
5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes Endmill
GMACB58RHL3015
3/4 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.25 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM34RL4250
1/8 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM18RL4015
1/4 in. Diameter x 1/2 in. Length of Cut x 2 in. Overall Length x 0.06 in. Radius Carbide 4 Flutes GMS2 Coated Endmill
GMRF14RS4060
1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMS2 Coated Endmill
GMRF12RXL4015
1/4 in. Diameter x 3/8 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes Endmill
GMANR14R30151.125
10 mm Diameter x 16 mm Length of Cut x 50 mm Overall Length x 0.50 mm Radius Carbide 4 Flutes GMX-35 Coated Endmill
GM1000MMRS4050
1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill
GMHTCB12R7030
3 mm Diameter x 12 mm Length of Cut x 38 mm Overall Length x 0.20 mm Radius Carbide 3 Flutes ZrN Coated Endmill
GMA0300MMR3020ZRN
1/4 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill
GMHT14RL7030