1/4 Ton, L-100-250WO-20, Hand Chain Hoist With 20 Foot Lift & Overload Protection
- Item Code: 101250-JPW
- (912)
- Availability:
- Mfg Part #: 662756198594
- Brand: Jet
Unit Size: 1
Features Back To Top
- Safety
- Backed by a lifetime replacement warranty, JET��s revolutionary single-piece brake design fuses the three components into the safest brake system in the market
- Slip clutch style overload protection that prevents lifting or pulling damaging loads beyond the rated capacity of the hoist and when triggered, the overload protection can be reset on site
- Weston style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear for greater load security
- Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
- Durability
- Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
- Secured with Allen screws and lock nuts, the cast-steel safety latches are more durable than stamped steel latches and will not bend out of compliance with lifting regulations
- Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
- Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Tech Specs Back To Top
| Brand | Jet |
|---|---|
| Country of Origin | CN |
| Gross Weight (lbs.) | 16 |
| Hand Chain Overhaul (Ft.) to Lift Load 1Ft. | 18 |
| Hand Chain Pull Force (LBF) to Move Load | 42 |
| Headroom (In.) | 9-13/16 |
| Lift (Ft.) | 20 |
| Load Capacity (Tons) | 1/4 |
| Load Chain Dimensions (Mm.) | 4 x 12 |
| Model Number | L-100-250WO-20 |
| Number of Falls | 1 |
| Overload Protection | Yes |
| UPC | 662756198594 |
| Weight (Lbs.) | 14 |
Customer Reviews
Back To Top912 Customer Reviews
4.5 out of 5 stars overall
of customers recommend
this thing is awesome
Jon Smith
so i am converting the walk up attic in my Cape Cod style house into a 2nd floor. Bought this to do the framing with. its awesome, hands down. ive used a few other brands but there is a few things i liked about it: 1- changeable directed exhaust feature. no more blow back in the face 2- nail depth of drive is easy to change on the fly. 3- ive run about 1200 nails through it. 1 jam and that was a defect in the nail clips spacing. not once did it try to shoot more than 1 nail per trigger pull.
Outstanding quality
Michelle Gibson
The Porter Cable Framing Nail Gun was a good value and is an excellent product. First, the no-mar nylon foot slides right off to reveal barbs that help to hold the gun in place when toe-nailing framing projects. Second, a few drops of included oil in the air inlet is all it takes to complete preventive maintenance on the tool. The case keeps all the components together in one place. At just over 100 3" nails so far and not one jam or mis-fire. I have other Porter Cable nail guns that I have been so impressed with and plenty of framing to do on my remodel. I might even build my own shop with this gun to make the most of it!
Powerful.
Terry Alistair
Have used this nailer to put together a 24 X 52 ' garage. Absolutely great, takes changes in nails without issue, operated between 80 and 120 PSI, had very few nails to knock down even in the treated beams. If this one ever dies I will buy another, this thing is great. Doing siding, depth of drive was easy to make when needed and the results were consistent.
Even though I have two framing nailers, I could not pass up the deal on this one.
Richard Dean
Great quality nailer at a fantastic price. Just remember to turn the exhaust port on the top of the nailer so it doesn't hit you in the face when leaning over the nailer. I'm very happy with it . It appears to be as good of quality as my more expensive Hitachi and better than my Cambell Hausfeld. It uses the plastic sleeved nails and sometimes leaves plastic pieces under the nail head. This can be a problem if the nails are exposed like the top of a deck but otherwise perfect so far. Most of the plastic pieces are easily brushed away. Every now and then I would have to pull a plastic piece out from under the nail head. This is nit picking and not a problem for framing.
This is the second one of these I've purchased. I bought the first one several years ago and have...
Jane Williams
This is the second one of these I've purchased. I bought the first one several years ago and have used it to build everything from houses to sheds or just putting up a new wall. I just bought the second one as a Christmas gift for my father-in-law. It is the lightest of all the framing guns at around 7 lbs making it easy to handle when nailing while your arm is extended. It also comes with a belt hook, so you can hang it while working on a ladder. I own two other framing guns and this is the one I always pick up first on a job and usually loan out the other two. It has it's limitations. Its not as fast as some of the more expensive guns. It doesn't do rapid touch-and-go style very well, but I like taking my time.
Great for detail projects
Becky Sing
We bought this compressor to install trim around our porch roof and to install a chair rail in one of our bedrooms. The tools provided in this combo were perfect for both jobs. I loved the option of 2 couplers so we could both be using the compressor at the same time! Much easier than lugging the compressor around when moving around the room. A great purchase for detail projects! We can't wait to use it again.
Solid nail gun
Frank Smith
I bought this for my company use and it's very solid. The only problem I have is the higher price for the nails the gun uses. The upfront savings will definitely be lost due to the cost of the plastic-collated nail strips.
Good Product
Peron Markinson
Used for long hours without problem. Not as noisy as expected as per reviews. Good for the price.
Just what I wanted in a nail gun!
Parker Bragg
Very happy with the performance and nice llittle details of this roofing gun. Makes my job go so much faster!
It is an excellent working tool, buy this combo to make a wooden ceiling and was fantastic, super...
Mike Julio
It is an excellent working tool, buy this combo to make a wooden ceiling and was fantastic, super fast without using hammers or nail pain, and my wife can help me easily :). It has 2 pistols and a stapler, I use the 3 and I speed up the work. In addition the compressor has an extra amount of tools to adapt. I already buy it an inflator kit and a paint kit.
Related Items Back To Top
1/4 Ton, L-100-250WO-10, Hand Chain Hoist With 10 Foot Lift & Overload Protection
101200-JPW
1/4 Ton, L-100-250WO-30, Hand Chain Hoist With 30 Foot Lift & Overload Protection
101223
1/4 Ton, L-100-250WO-15, Hand Chain Hoist With 15 Foot Lift & Overload Protection
101225
