6.4mm Diameter 5xD Drill, 3 flutes, Carbide, Bright Finish, Straight Shank, 150° Point, Right Hand Cut

5518-6.40

1/2 Inch Diameter, Jobber Drill, 2 flutes, HSS-E-PM, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

530-12.70

17/32 Inch Diameter, Jobber Drill, 2 flutes, HSS-E-PM, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

530-13.49

4.9mm Diameter 3xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5510-4.90

7.9mm Diameter 3xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5510-7.90

3/4-10 Tap, UNC thread, H5/H6, 4 flutes, HSS-E, TiN Coated, 40° Spiral Flute

3922-19.05

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

3079-6.354

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

3079-7.944

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

3079-9.524

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.062 radius

3079-12.706

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.062 radius

3079-15.876

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.125 radius

3079-19.059

11.2mm Diameter Jobber Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

206-11.20

7.9mm Diameter Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

658-7.90

1/4 Inch Diameter, Jobber Drill, 2 flutes, HSS-E-PM, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

530-6.35

5.2mm Diameter Screw Machine Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

653-5.20

5.25mm Diameter Screw Machine Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

653-5.25

3/16 Inch Diameter, 20xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

6511-4.76

4mm Diameter Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

652-4.00

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0039 chamfer

3181-9.52

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3179-6.35

5/64 Inch Diameter, 7xD Drill, 2 flutes, Carbide, Super A Coated, Straight Shank, 140° Point, Right Hand Cut

6401-1.98

8.3mm Diameter Screw Machine Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

552-8.30

8.25mm Diameter Jobber Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

549-8.25

1/16 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

5537-1.59