1/8 Inch Diameter, Jobber Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 130° Point, Right Hand Cut

605-3.17

#36 Diameter, Jobber Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 130° Point, Right Hand Cut, 10/pack

605-2.71

10-24 Tap, UNC thread, H6/H7, 4 flutes, HSS-E, TiN Coated

1582-4.826

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.09 radius

3091-15.877

1.53mm Diameter Screw Machine Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 130° Point, Right Hand Cut, 10/pack

552-1.53

#40 Diameter, 5xD Drill, 2 flutes, Carbide, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

732-2.49

5/16-24 Tap, UNF thread, H3/H4, 3 flutes, HSS-E-PM, TiN Coated

3908-7.938

F Diameter, Jobber Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

5523-6.53

5.2mm Diameter Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

651-5.20

9.65mm Diameter Jobber Drill, 2 flutes, HSS, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

205-9.65

M12X1 Tap, metric fine thread, D4/D5, 3 flutes, HSS-E, Bright Finish

830-12.005

0.85mm Diameter Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut, 10/pack

657-0.85

2.8mm Diameter Screw Machine Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut, 10/pack

659-2.80

9mm Diameter 5xD Drill, 2 flutes, Carbide, nano-A Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5744-9.00

7/16 Inch Diameter, 40xD Drill, 2 flutes, Carbide, TiCN Coated, with Coolant, Straight Shank, Right Hand Cut

5641-11.113

8.5mm Diameter Jobber Drill, 2 flutes, HSCO, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

2458-8.50

6mm Diameter Jobber Drill, 2 flutes, HSCO, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

2458-6.00

9mm Diameter Jobber Drill, 2 flutes, HSCO, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

2458-9.00

3/64 Inch Diameter, 5xD Drill, 2 flutes, Carbide, TiAlN Coated, Straight Shank, 140° Point, Right Hand Cut

3899-1.19

6.8mm Diameter 7xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Whistle Notch Shank, 140° Point, Right Hand Cut

5612-6.80

5.2mm Diameter Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

657-5.20

17/32 Inch Diameter, Screw Machine Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

659-13.49

M6X1 Threadmill, 3 flutes, Carbide, TiCN Coated, with Coolant

3737-6.000

M12X1.75 Tap, metric thread, D5/D6, 4 flutes, HSS-E, TiCN Coated

3945-12.00

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, 2-1/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.0118 chamfer

4260-9.52