6-40 PowerTap, UNF thread, H2, 3 flutes, HSS-E, Steam Oxide Coated, 40° Spiral Flute

4409-3.505

1.3mm Diameter Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut, 10/pack

657-1.30

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3-3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0138 chamfer

4253-15.87

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

3179-19.05

1.1mm Diameter 4xD Drill, 2 flutes, Carbide, Super A Coated, Straight Shank, 140° Point, Right Hand Cut

6400-1.10

10-32 Threadmill, 3 flutes, Carbide, TiCN Coated, with Coolant

4136-4.826

5mm Diameter Spot Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 90° Point, Right Hand Cut

568-5.00

1mm Diameter 4xD Drill, 2 flutes, Carbide, Super A Coated, Straight Shank, 140° Point, Right Hand Cut

6400-1.00

3.9mm Diameter Jobber Drill, 2 flutes, HSS-E-PM, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

530-3.90

9.7mm Diameter Taper Length Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

5537-9.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

3113-12.70

1/16 Inch Diameter, Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 130° Point, Right Hand Cut, 10/pack

658-1.59

12.1mm Diameter Jobber Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

206-12.10

#29 Diameter, 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

2463-3.45

D Diameter, Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

502-6.25

#29 Diameter, 5xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

2464-3.45

M18X1 Tap, metric fine thread, D4/D5, 4 flutes, HSS-E, Bright Finish

827-18.005

9/32 Inch Diameter, 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

2463-7.14

9/64 Inch Diameter, 15xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

6509-3.57

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.125 radius

6759-12.709

M20X2.5 PowerTap, metric thread, D8, 4 flutes, HSS-E, TiCN Coated, 40° Spiral Flute

4412-20.00

7/64 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

317-2.78

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3113-7.94

18.5mm Diameter 1.5xD Drill, 2 flutes, tool steel, nickel-plated Coated, with Coolant, Whistle Notch Shank, Right Hand Cut

4106-18.50

18.5mm Diameter Drill Body, 2 flutes, Carbide, FIREX Coated, 140° Point, Right Hand Cut

4112-18.50