5/8-11 Tap, UNC thread, H5/H6, 4 flutes, Carbide, Bright Finish, with Coolant

4118-15.875

0.3mm Diameter 5xD Drill, 2 flutes, Carbide, TiAlN Coated, Straight Shank, 140° Point, Right Hand Cut

3899-0.300

5.1mm Diameter 12xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

5525-5.100

5.1mm Diameter 25xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

6512-5.100

1/4 Inch Diameter, Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

667-6.350

3.1mm Diameter 3xD Drill, 2 flutes, Carbide, nano-Si Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

8520-3.100

1/8 Inch Diameter, 3xD Drill, 2 flutes, Carbide, nano-Si Coated, Straight Shank, 140° Point, Right Hand Cut

8524-3.170

13/64 Inch Diameter, Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

502-5.16

5/16 Inch Diameter, 5xD Drill, 3 flutes, Carbide, TiN Coated, Straight Shank, 150° Point, Right Hand Cut

609-7.940

11/64 Inch Diameter, Jobber Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 130° Point, Right Hand Cut

605-4.37

6.5mm Diameter 5xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5511-6.50

8mm Diameter Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

504-8.0

1/4-20 Tap, UNC thread, H4/H5, 3 flutes, HSS-E, TiCN Coated, 40° Spiral Flute

3949-6.350

M12X1.75 Tap, metric thread, D5/D6, 3 flutes, HSS-E, Bright Finish, 40° Spiral Flute

890-12.00

5/8-18 Tap, UNF thread, H4/H5, 4 flutes, HSS-E, TiCN Coated, 40° Spiral Flute

3950-15.875

5/8-18 Tap, UNF thread, H4/H5, 4 flutes, HSS-E, FIREX Coated

3938-15.875

10-24 Tap, UNC thread, H3/H4, 4 flutes, HSS-E, FIREX Coated

3937-4.826

1/4-20 Tap, UNC thread, H4/H5, 4 flutes, HSS-E, FIREX Coated

3937-6.350

9/16-12 Tap, UNC thread, H5/H6, 3 flutes, HSS-E, TiCN Coated, 40° Spiral Flute

3949-14.288

3.3mm Diameter 3xD Drill, 2 flutes, Carbide, nano-Si Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

8520-3.30

10.6mm Diameter Screw Machine Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 130° Point, Right Hand Cut

329-10.6

#40 Diameter, 3xD Drill, 2 flutes, Carbide, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

730-2.49

10-32 Tap, UNF thread, H11, 3 flutes, HSS-E-PM, TiN Coated

3987-4.826

5/8-11 Tap, UNC thread, H5/H6, 3 flutes, HSS-E, Moly Glide Coated

3961-15.875

M8X1.25 Tap, metric thread, D4/D5, 3 flutes, HSS-E, Moly Glide Coated

3960-8.00