7/32 Inch Diameter, Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

652-5.56

17/64 Inch Diameter, 3xD Drill, 2 flutes, Carbide, FIREX Coated, Straight Shank, 140° Point, Right Hand Cut

5514-6.75

8.5mm Diameter 7xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5512-8.50

3.3mm Diameter 5xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5511-3.30

2mm Diameter 15xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

6412-2.00

3.3mm Diameter Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

5519-3.30

3.5mm Diameter 12xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

5525-3.50

12mm Diameter 3xD Drill, 2 flutes, Carbide, FIREX Coated, Straight Shank, 140° Point, Right Hand Cut

5514-12.0

5/16 Inch Diameter, Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

5519-7.94

#11 Diameter, Screw Machine Drill, 2 flutes, HSS-E-PM, FIREX Coated, Straight Shank, 130° Point, Right Hand Cut

515-4.850

#25 Diameter, 3xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5510-3.80

3mm Diameter 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

2463-3.00

1/8 Inch Diameter, 7xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5512-3.17

0.85mm Diameter Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

667-0.85

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/37/38° Helix Angle, 0.0059 chamfer

6757-4.76

1.8mm Diameter 5xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

6405-1.80

M14X2 Tap, metric thread, D5/D6, 4 flutes, HSS-E, TiCN Coated

3945-14.00

M14X1.5 Tap, Modified Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

1090-14.007

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, Super A Coated, HA Shank, 92mm Overal Length, 35/38° Helix Angle, 2.5 radius (mm)

3498-16.025

8-32 Tap, Spiral Point Plug, UNC thread, H3/H4, 3 flutes, HSS-E

3913-4.166

M12X1.25 Tap, Modified Bottom, metric fine thread, D7/D8, 6 flutes, HSS-E, TiN Coated, Form Tap

3975-12.006

M14X1.5 Tap, Spiral Point Plug, metric fine thread, D4/D5, 4 flutes, HSS-E-PM, TiN Coated

4123-14.007

6mm Diameter 7xD Drill, 2 flutes, Carbide, nano-A Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

5746-6.000

7/64 Inch Diameter, 5xD Drill, 2 flutes, Carbide, Straight Shank, 118° Point, Right Hand Cut

732-2.780

M9X1 Tap, Spiral Point Plug, metric fine thread, D4/D5, 3 flutes, HSS-E

827-9.005